Part #: 4102
1” ID axle spacers are made from 6061 billet aluminum bar stock, 1-1/2 OD, with a machine finish.
These are made for 1’ ball bearing wheels.
Sizes Available: 1/4" - 5/16" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" - 1" - 1-1/16" - 1-1/4" - 1-3/8" - 1-1/2" - 1-5/8" - 1-3/4' - 2" - 2-1/8" - 2-1/4" - 2-3/8" - 2-1/2" - 2-3/4' - 3"
See details
Online price only: $6.73
|
Part #: 3508
3/4” ID axle spacers are made from 12L15 alloy steel & flash chrome plated, 1-1/8 OD by 3/4 ID.
These are made for 3/4” Timken & ball bearing wheels, with a hard coat finish so they can be used as wheel seal adapters.
Sizes Available: 1/4" - 5/16" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" - 1" - 1-1/16" - 1-1/4" - 1-3/8" - 1-1/2" - 1-5/8" - 1-3/4' - 2" - 2-1/8" - 2-1/4" - 2-3/8" - 2-1/2" - 2-3/4' - 3"
See details
Online price only: $5.40
|
Part #: 4073
Fits Rev Tech 110" & Twin Cam-88 motors with 42, 45 & 48mm carbs. Chrome Plated
This beautifully machined stack is designed to increase intake air speed. It has the proper length, diameter & taper that promotes airflow.
The diverter straightens the air flow, prevents reversion and increases horsepower.
This stack can be used with or without the diverter.
See details
List price: $270.00
Online price only: $243.00
save 10% |
Part #: 4068B
With ignition switch hole & starter button hole.
- Billet aluminum
- Gloss Black powder coated, with machined highlights
- Accepts single & dual tower Dyna coils.
- Fits all H-D's with custom top motor mount.
See details
List price: $116.00
Online price only: $104.00
save 10% |
Part #: 3224
These Rocker Boxes have extra clearance for high lift cams and valve springs.
- 3 piece design for easy removal.
- All Hardware Included
- O-rings Included
- Billet Aluminum
- Chrome Plated
Sold as a front & rear set.
See details
List price: $591.00
Online price only: $502.00
save 15% |
Part #: 3936
5-3/4" Quartz Halogen Bulb
Glossy Black powder coated housing With smooth, chrome plated tri-bar benzel.
Machined from billet aluminum bar stock.
O-Ringed sealed.
See details
List price: $291.00
Online price only: $261.00
save 10% |
Part #: 3961
3 Degree Rake for Big Twins
With Fork Stop Lug
Raked cups produce no bad handling traits as do raked trees.
Chrome plated.
Includes bearings.
See details
List price: $99.00
Online price only: $89.00
save 10% |
Part #: 3707
1" Offset Kit, 1984-1990 B/T 5/6-Speed, W/24T sprocket
See details
List price: $218.00
Online price only: $196.00
save 10% |
Part #: 3800
Made from 7075 Billet Aluminum.
This beefed up support will eliminate flexing when using high lift cams & stiff valve springs.
See details
List price: $180.00
Online price only: $160.00
save 11% |
Part #: 3398
14mm Short Reach Set
- Use with dual plug heads, takes the place of the right side spark plugs.
- Stainless Steel
Push in cap, start motor, once motor starts, compression release automatically pops off.
Sold per pair(2)
See details
List price: $178.00
Online price only: $150.00
save 16% |
Part #: 4244
2000-2002 Twin Cams
Replaces Harley Davidson # 24039-01
See details
List price: $23.66
Online price only: $21.29
save 10% |
Part #: 4245
2003-Up Twin Cams
Replaces Harley Davidson # 24039-03
Also use this spacer when converting to a 45amp alternator
See details
List price: $23.66
Online price only: $21.29
save 10% |
Send us a picture of your bike with any of our products on it, and get it put on our website!
