Axles

Applications:
Models With 1" Bearings

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-Up Sportsters with 25mm Bearings

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
39mm Wide Glide Front Ends With 3/4" Wheel Bearings


These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with CNC turned bearing diameters.

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2001-2007 Touring

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-Up Touring
2008-Up Softails

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-Up Sportsters with 25mm Bearings
2004-2005 Dyna With 1" Bearings

This is a conversion axle that will allow you to use a wheel with 3/4" Bearings(Timken or Sealed) with the 39mm Front Ends Listed Above

Applications:
2008-17 Dyna with 25mm Bearings
2006-2007 Dyna With 1" Bearings
Does not fit Dyna Wide Glide

This is a conversion axle that will allow you to use a wheel with 3/4" Bearings(Timken or Sealed)

Axle and Spacer kit to Adapt 1984-99 FLH/FLT wheels to 2000-2013 Bagger Front Ends

Applications:
2008-Up Sportsters with 25mm Bearings
2004-2005 Dyna With 1" Bearings
2008-2017 FLST & FXST
THIS AXLE IS ONLY FOR MODELS ABOVE WITH MID GLIDE CONVERSION TREES

This is a conversion axle that will allow you to use a wheel with 3/4" Bearings(Timken or Sealed) with the Front Ends Listed Above

Applications:
2008-17 FXD
Does NOT fit FXDWG(Wide Glide)

High Quality, American Made
Stainlees Steel Axle

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Use These adapters when installing a wheel with 1 inch bearings on a frontend made for 3/4” axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

Use These adapters when installing a wheel with 25mm bearings on a frontend made for 3/4� axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

This is a conversion axle that will allow you to use a 16", 18" or 21" Big Twin Wheel(Softail,Wide-Glide Dyna, Touring & most aftermarket) with 3/4" Bearings(Timken or Sealed) with the Front Ends Listed Above

Applications:
2008-Up Sportsters with 25mm Bearings
2004-2005 Dyna With 1" Bearings
THIS AXLE IS ONLY FOR MODELS ABOVE WITH WIDE-GLIDE CONVERSION TREES

This is a conversion axle that will allow you to use a 19" or 21" Narrow-Glide Wheel(XL, FXR, DYNA) with 3/4" Bearings(Timken or Sealed) with the Front Ends Listed Above