Chain Conversion Kits

Available here for more Harley models than anywhere else!

Shop Now

Featured Products

1984-99 Timken Bearing Wheel to 2008-Up XL & 04-05 Dyna Front End

4748-S

Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

$99.00

 

28T & 27T Compensator Eliminator for Baker DD6 Transmission Kit

4831-28

Solid sprocket conversion to eliminate compensator assembly.
Eliminates slippage and noise from compensator.
It replaces your failing stock compensating sprocket and reduces driveline noise level.

Made from Tool Steel & Heat Treated.

MADE IN USA

Includes Flat washer & Grade 8 nut.

$149.00

 

32 Tooth Motor Sprocket and Adjuster Kit for 2018-Up M8 Touring

4810

Our kit gears down your bike and upgrades the stock primary chain auto-adjuster to our bullet proof manual adjuster.
Solid sprocket conversion eliminates compensator assembly.

$450.00

$439.00

2% Off  
Quantity

De-Rake Kit for Sportster, FXR & FXD

4803-3978

Fits:
1988-Up FXR
1991-2017 FXD
1988-Present Sportsters

$269.00

 

Exhaust Stud & Nut Set- Stainless Steel

4798

Machined from Stainless Steel
Will never rust, seize up and leave you with a broken stud in the head.
Made correctly with course thread on the engine side and fine on the nut side.
Set of 4 for one engine, includes Serrated Stainless Flange Nuts.

$39.00

 
Quantity

Rear Timken Bearing Wheel Conversion for 2005-Up Sportster

4792

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks

$299.00

$279.00

7% Off  

Rear Timken Bearing Wheel Conversion for 2006-17 Dyna

4753

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

$299.00

 

Shaft-LOC Rocker Arm Support Set, All Twin Cams

3800A

Made from Billet Aluminum.

This beefed up support will eliminate flexing when using high lift cams & stiff valve springs.

$379.00

 

Softail & FXD Chain Conversion Kit, 2018-UP M-8

4721

Our Conversion kit includes everything needed to covert your 2018-UP Milwaukee 8 Softail belt drive to a heavy duty 530 O-ring chain

$320.00

$299.00

7% Off  

Timken Bearing Wheel to 2006-17 Dyna Front End 49mm- Stainless Steel

4751-S

Adapts 1978-1999 3/4" Timken bearing front wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna Narrow/Mid Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock dyna disks)
Single or Dual Disk available

Not for FXDWG(Wide Glide Dyna)

$179.00

 

Touring Swingarm Swap/Upgrade Adapter Set For 1984-01 FXR & Touring Models

4818

Simple Swingarm Adapters for upgrading your 1984-01 Touring & FXR to the newer 2002-2008 Swingarm
Made from stainless steel

Remove existing adapters in 02-08 Swingarm and install these. Reuse your stock pivot shaft & 02-08 spacer blocks.

$69.00

 
Quantity

10mm Compression Release Sets- Brass Cap

3642B

For Harley Davidsons

Push in cap, start motor, once motor starts, compression release automatically pops off.

Our Same Corrosion Resistant All Stainless Steel Compression Release with a Solid Brass Cap!

Sold per pair(2)

$54.00

 

19" Rear 7 Spoke Morris Mag Hub Set for 2000-2018 XL

4735

Now Available for 7 Spoke 19" Morris Mags Wheels (Harley # 43522-77)
We have made hubs that adapt this wheel to replace 2000-Up Rear Wheel applications
Uses standard 2000-Up Brake disc and Sprocket/Pulley (2.2" Locating Diameter)
One side of the wheel will need to be drilled & tapped to 7/16-14.

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers. Wheel will drop into place of the stock wheel.

This can be used with 2000-Up Sportsters, Dynas & Most Softails

(Also can be used with 1984-1999 Sportster, FXR, Softail and Dyna. These will need 2000-up brake disk, 2000-up sprocket/pulley and axle spacer adjustment.)

Drill and tap set available when you buy this kit:

  • High Quality "U" Drill
  • High Speed Steel 7/14-14 Plug Tap
     

Kit Includes:
Adapter Hubs
Inner Wheel Sleeve
Hub Mounting Hardware
Bearings

(This does not include the wheel)

$339.00

$199.00

41% Off  

19" Rear Wheel Converison Kit - Timken to Sealed Bearing

4714

Having a hard time finding sealed bearing wheels?
This kit allows you to use the 1999-older tapered bearing wheel in place of 2000-up 3/4" ,1" or 25mm sealed bearing wheels.
Timken bearings are not used, new bearings are used in the adapter hubs.
Adapts 1984-99 19" Front Mag or Wire Wheels to Rear of 2000-Up Sportsters.
Use your stock Brake rotor and sprocket/pulley bolts.

This can be used with any Harley Model(Dyna, FXR, Softail)

Choose your Bearing/Axle Size from the list.

Includes:
Brake side hub adapter
Pulley side hub adapter
2 Bearings
1 Inner Bearing Sleeve
7/16-14 Spacer to wheel bolts- Grade 8
5/16-18 Spacer to wheel bolts- Grade 8

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

  • High Quality "U" Drill
  • High Speed Steel 7/14-14 Plug Tap
$200.00

$185.00

8% Off  

19" Rear Wheel Converison Kit for Sportsters XL

4621

Adapts 2000-Up & 1984-99 19" Front Mag Wheels to Rear of XL Sportsters
Use your stock Brake rotor and sprocket/pulley bolts
Stock bearings stay in the wheel, where they are the strongest.
Choose your Bike year from the list.

Please note 2005-2007 front wheels need to be converted from 3/4" to 1" to use on same year rear.

Includes:
Dual Pattern brake disk spacer
Dual Pattern pulley spacer
7/16-14 Spacer to wheel bolts- Grade 8
7/16 Lock Washers
5/16-18 Spacer to wheel bolts- Grade 8
2 Axle spacers

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

  • High Quality "U" Drill
  • High Speed Steel 7/14-14 Plug Tap

$122.50

 

New Added Products

32 Tooth Motor Sprocket and Adjuster Kit for 2018-Up M8 Touring

4810

Our kit gears down your bike and upgrades the stock primary chain auto-adjuster to our bullet proof manual adjuster.
Solid sprocket conversion eliminates compensator assembly.

$450.00

$439.00

2% Off  
Quantity

Replacement Sprocket Spacer for 2018-Up Softail Chain Kit

4194A

Replacement rear wheel spacer for our 2018-Up Softail Chain Kits

Billet Aluminum
7/16" Socket Head Screws are included.


$47.00

 
Quantity

Front Fender for 39mm Dyna, FXR & XL Front Ends

4841

Nice OEM Style Front Fender for  39mm Front Ends
Raw Steel
Fits 19" Wheels

$73.00

 
Quantity

Transmission Mainshaft Sprocket / Pulley Spacer, 2006-Up XL Belt to Chain

4729-1

Fits 2006-UP Sportsters
Use this spacer when converting from a belt pulley to an OEM style sprocket (thin spline).
Used with our chain kits for 2006-UP
Sportsters
 

$20.00

 
Quantity

SBS 11.5" Front Brake Rotor/Disk

SBS5139

Stock Replacement For 2000-Up Bikes
Has 2.2 Locating Diameter for 2000-Up Wheels
For Wheels that have standard 5 Bolt Pattern.
Made from Stainless Steel & works with stock or aftermarket calipers.
11.5" OD

$138.00

 

EBC 11.5" Front Brake Rotor/Disk

FSD008

Stock Replacement For 2000-Up Bikes
Has 2.2 Locating Diameter for 2000-Up Wheels
For Wheels that have standard 5 Bolt Pattern.
Made from Stainless Steel & works with stock or aftermarket calipers.
11.5" OD

$112.00

 

1980-84 5 Speed Transmission Sprockets, FXR & FLT

33336-86

Stock Replacement For 1980-84 FXR & FLT Models
Made for 530 Chains.
Choose from 22T or 23T
 

$36.00

 

Stock Replacement Axle Spacer Sets for Dyna

43617-95_43358-83A

Each application comes with all spacers for an axle.

3/4" Sets made from Stainless Steel
1" & 25mm spacers are Aluminum

$20.00

 

Stock Replacement Axle Spacer Sets for FXR

43617-95_43358-83

Each application comes with all spacers for an axle.

Made from Stainless Steel

$20.00

 

Primary Gasket and Seal Kit for 1965-84 FX, FL,FLH,FXE & Softail

4838

High Quality Foam Coated Steel Core Gaskets
Same technology as new OEM gaskets.

$49.99

 
Quantity

1978-83 Timken Bearing Wheel to 2008-22 XL & 04-05 Dyna Front End

4837-S

Adapts 1978-83 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

$237.00

 

Offset Motor Sprocket, 1-1/4"-24

4218

24 Tooth
1-1/4" offset for 1991-up Softail

1-1/2" offset for 1970-90 Big Twin

Includes heat treated 4150 sprocket, Machined thick flat washer and Tool steel sprocket shaft and nut.

$163.00

$147.00

10% Off  
Quantity

Stock Replacement Axle Spacer Sets for XL/Sportsters

XL43617-95_43358-83A

Each application comes with all spacers for an axle.
99-Older rear sets have 3 axle spacers.
3/4" Sets made from Stainless Steel
1" & 25mm Spacers are Aluminum

$20.00

 

Floating Brake Rotor/Disk 11.5" or 11.8"

4822-FLOAT

Replacement For 2000-Up Bikes
Has 2.2 Locating Diameter for 2000-Up Wheels
For Wheels that have standard 5 Bolt Pattern.
Made from Stainless Steel & works with stock or aftermarket calipers.
Choose from 11.5" OD or 11.8"

$219.00

$169.00

23% Off  

1978-83 Timken Wheel to 2000-07 39mm Front End

4797-S

Adapts 1978-1983 Timken bearing Front wheels to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has correct length axle spacers and special width adapter disk spacers to work with the 2000-up legs.
Includes special ID bore brake disk made so no modification to wheel is necessary. Replacement brakes disks available here
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

$169.00

 

23T Engine Sprocket for Tapered Shaft Knuckle, Pan, Flathead 1930-1954

40210-30

Stock Replacement for:
1930-1954 61" & 74" Big Twin and 74" & 80" Flat head

Tapered Shaft

$67.00

 
Quantity

19" Rear Wheel Converison Kit - 06-17 Dyna Front Wheel to 3/4" Rear Axle Bikes

4834

This kit allows you to use 06-17 Dyna Mid-Glide Front wheels in the Rear of 2000-04 Sportsters & 2000-05 Dyna

$179.00

 

28T & 27T Compensator Eliminator for Baker DD6 Transmission Kit

4831-28

Solid sprocket conversion to eliminate compensator assembly.
Eliminates slippage and noise from compensator.
It replaces your failing stock compensating sprocket and reduces driveline noise level.

Made from Tool Steel & Heat Treated.

MADE IN USA

Includes Flat washer & Grade 8 nut.

$149.00

 

Replacement shoe for #4786 Gear Down Kits

4786-2

Replacement shoe for #4786 Gear Down Kits

$68.00

 
Quantity

Easy Adjust Pushrod Tube Set for Twin Cam

4832

The pushrod tubes on twin cams do make it easy to wrench on adjustable pushrods.
These have a shorter bottom section and longer clip so the tubes can be pushed up much more than the stock ones.
Chrome plated
Includes all new O-rings
Must re-use the stock inner tubes.
For 1999-2017 Twin Cam Engines

$59.00

 
Quantity

Featured Categories